Ceramic Industry

CERAMIC INDUSTRY

General supplies for sanitary-ware industry and innovative solutions to improve production processes, increasing cost efficiency and reducing enviromental impact.

Blakite

DESCRIPTION


The refractory mortars are normally supplied as ready-to-use wet blends of finely ground aggregates and special binders.
They develop good strength on air drying, forming strong joints and conferring an almost monolithic structure to the brickwork.

 
TYPE

Refractory air-setting mortars.

 
CLASSIFICATION TEMPERATURES

JM 2600:1430°C
BlakiteTM:1650°C
Blakite V:1650°C
JM 3300:1760°C
 

MAXIMUM CONTINUOUS USE TEMPERATURE

The maximum continuous use temperature depends on the application. In case of doubt, contact us.
 

AVAILABLE TYPES

JM 2600:
This is an air-setting cement developed for use in lower temperature applications, where a high-strength bond is required. It is recommended for mortaring insulating firebricks for operating temperatures up to 1430°C and can be used for both trowelled and dipped joints.

Blakite:
This is a highly refractory mortar, dark grey in colour, which has a high water-retention characteristic. It was specially developed for laying insulating firebricks but is also suitable for use with super-duty and high alumina dense refractory bricks, at operating temperatures up to 1650°C. It is supplied in a consistency suitable for shallow patching or trowelling but requires the addition of approximately 5% water for dipping. Blakite is a good choice as a single, general-purpose mortar on projects involving mainly insulating firebricks but also including some dense firebricks.

Blakite V:
This is the standard product with a harder consistency to be used to glue special refractory shapes and steel plates.

JM 3300:
A very highly refractory air-setting mortar suitable for laying JM 32 insulating firebricks, and high alumina dense refractory bricks and for operating temperatures up to 1760°C.

 
FEATURES
  • Good workability, ideal plasticity and water retention
  • Low drying and firing shrinkages
  • High refractoriness
  • High bonding strength
  • Good resistance to chemical attack
  • Stability of chemical components
 
APPLICATIONS
  • For laying insulating firebricks, super-duty and high alumina dense refractory bricks
  • Provide resistance to infiltration of air or hot gases
  • Hobby and laboratory kilns
  • Retard penetration of slag and molten metal into the joints

Print

REQUEST INFORMATION:


Please insert the result of :
2 + 4 =
Privacy* Art. 13, D.Lgs. 196/2003.
Subscribe to the newsletter

Blakite

DESCRIPTION


The refractory mortars are normally supplied as ready-to-use wet blends of finely ground aggregates and special binders.
They develop good strength on air drying, forming strong joints and conferring an almost monolithic structure to the brickwork.

 
TYPE

Refractory air-setting mortars.

 
CLASSIFICATION TEMPERATURES

JM 2600:1430°C
BlakiteTM:1650°C
Blakite V:1650°C
JM 3300:1760°C
 

MAXIMUM CONTINUOUS USE TEMPERATURE

The maximum continuous use temperature depends on the application. In case of doubt, contact us.
 

AVAILABLE TYPES

JM 2600:
This is an air-setting cement developed for use in lower temperature applications, where a high-strength bond is required. It is recommended for mortaring insulating firebricks for operating temperatures up to 1430°C and can be used for both trowelled and dipped joints.

Blakite:
This is a highly refractory mortar, dark grey in colour, which has a high water-retention characteristic. It was specially developed for laying insulating firebricks but is also suitable for use with super-duty and high alumina dense refractory bricks, at operating temperatures up to 1650°C. It is supplied in a consistency suitable for shallow patching or trowelling but requires the addition of approximately 5% water for dipping. Blakite is a good choice as a single, general-purpose mortar on projects involving mainly insulating firebricks but also including some dense firebricks.

Blakite V:
This is the standard product with a harder consistency to be used to glue special refractory shapes and steel plates.

JM 3300:
A very highly refractory air-setting mortar suitable for laying JM 32 insulating firebricks, and high alumina dense refractory bricks and for operating temperatures up to 1760°C.

 
FEATURES
  • Good workability, ideal plasticity and water retention
  • Low drying and firing shrinkages
  • High refractoriness
  • High bonding strength
  • Good resistance to chemical attack
  • Stability of chemical components
 
APPLICATIONS
  • For laying insulating firebricks, super-duty and high alumina dense refractory bricks
  • Provide resistance to infiltration of air or hot gases
  • Hobby and laboratory kilns
  • Retard penetration of slag and molten metal into the joints